Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 58

Page: 58 / 82

Chapter 1 Error Codes

6005 8859

Delete Pair(Pairsplit-S) operation with C/T option

failed because some R-VOLs in the group are in

Duplex(PAIR) or Pending(COPY) status.

Select [OK] to continue the operation without

shut down of the connected SCSI host(s). Select

[Cancel] if you need to terminate the operation

and shut down the host(s).

I 4

6005 8860

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8861

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8862

Please wait a few minutes and retry the Delete

Pair(Pairsplit-S) operation.

The delete pair (Pairsplit-S) operation failed. A

few minutes later, please refresh the screen,

confirm if the specified volumes are in the

permissible status, and then retry the operation.

I 4

6005 8863

Unknown Error Code.

The Remote Console PC detected an unknown

error code. Please call the Hitachi Data Systems

Support Center.

E 4

6005 8864

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8865

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8866

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8867

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8868

Duplicate CT Group#(A CT Group has been already

active in MCU).

The operation failed because a duplicate C/T

Group is already active in the MCU. Verify the

status of the C/T group and retry the operation.

E 4

6005 8869

CT Group is not active.

Verify that the C/T group is active in the MCU.

6005 8870

CT Group Option cannot be changed unless all

asynchronous pairs in the group are suspended or

deleted.

The group operation failed because the specified

group has at least one asynchronous pair.

Renew and check the TrueCopy screen.

I 4

6005 8871

The TrueCopy – S/390

Asynchronous function is not

installed in specified MCU.

Install TrueCopy Asynchronous in the MCU and

retry the operation.

I 4

6005 8872

This version does not support multi CT Groups in the

MCU.

This microcode version does not support multiple

C/T Groups in the MCU. Verify the status and

retry the operation.

I 4

6005 8873

TrueCopy Asynchronous function is not installed in

specified MCU.

Install the TrueCopy Asynchronous function in

the MCU, then retry the operation.

I 4

6005 8874

Invalid Timer Type option.

Specify "Local" or "None" for the timer type on

the TrueCopy panel, then retry the operation.

I 4

6005 8875

At least one asynchronous pair is active in this group. Renew and check the TrueCopy screen.

6005 8876

There are no PCBs which corresponds to the

specified port type.

Confirm the PCB type and try the operation again

with a correct parameter.

I 4

6005 8877

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8878

CT Group is not active.

Verify that the C/T group is active in the MCU.

6005 8879

At least one asynchronous pair is active in this group. Verify that there are no active asynchronous

pairs in this group, and retry the operation.

I 4

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands