Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 80

Page: 80 / 82

Chapter 1 Error Codes

8005 7111

An error occurred. If this problem persists, please call

the Support Center.

8005 8001

An error occurred while connecting to the subsystem.

Please retry a little later.

Retry the same operation several times. If the

same error occurs, call the service personnel.

E 6

8005 8100

An error occurred while connecting to the subsystem.

Please retry a little later.

Retry the same operation several times. If the

same error occurs, call the service personnel.

E 6

9005 5099

An error occurred. If this problem persists, please call

the Support Center.

You have specified Virtual LVI/LUN operation to

a request of the configuration information setting.

The error does not occur normally because it is

guarded in the screen. Contact the program

maker.

E 2

9005 6001

An error occurred. If this problem persists, please call

the Support Center.

Please call your maintenance support center to

report them with the error code.

E 2

9005 6012

An error occurred. If this problem persists, please call

the Support Center.

9005 6036

An error occurred. If this problem persists, please call

the Support Center.

Please check the inputted value and retry.

9005 6502

This key code is invalid.

Please wait for a moment and retry.

9005 7111

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7112

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7113

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7114

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7115

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7116

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 7117

An error occurred. If this problem persists, please call

the Support Center.

Call the service personnel.

9005 8100

An error occurred while connecting to the subsystem.

Please retry a little later.

Please call your maintenance support center to

report them with the error code.

E 6

9005 8102

This function is not supported.

Please check the DKC microcode version.

9005 8103

The subsystem status is invalid. Please call the

Support Center.

Please check the DKC microcode version.

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands