Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 69

Page: 69 / 82

Hitachi Lightning 9900™ V Series Remote Console Error Codes

7010 8586

The number of groups that can be set in the same

subsystem is invalid.

7010 8587

The number of pairs that can be set in the same group

is invalid.

7010 8588

The specified group number is not set.

7010 8589

The specified group name is invalid.

7010 8590

The group name and the number do not match.

7010 8591

The specified pair is already set in another group.

7010 8592

The command was rejected, because the licensed

capacity was exceeded.

Check the capacity of the installed license key. If

you need to create more pairs, purchase a

license key for larger capacity.

I 0

7010 8593

The P-VOL is a source volume for hierarchical control. Check the corresponding condition.

7010 8594

The P-VOL is a destination volume for hierarchical

control.

Check the corresponding condition.

7010 8595

The specified P-VOL does not exist.

Refresh, and then retry the operation.

7010 8596

The specified volume is a reserved volume.

7010 8597

No more pairs can be created for the specified P-VOL. You cannot create pairs for the P-VOL anymore.

Delete the existing pairs.

I 0

7010 8598

The specified volume is not a P-VOL.

7010 8599

The specified volume is already a P-VOL.

Specify other P-VOL, and retry the operation. Or

delete the pair of the specified volume, and then

retry the operation.

I 0

7010 8600

The RAID level of the specified volume is not

supported.

Check the RAID level, and specify a volume of

the supported RAID level, and then retry the

operation.

I 0

7010 8601

The target P-VOL cannot be paired with a backup

server volume.

7010 8602

The volume is already a reserved volume.

Specify other P-VOL, and retry the operation. Or

release the Reserve attribute of the specified

volume, and then retry.

I 0

7010 8603

The target volume is set as a primary volume for

online data migration.

7010 8604

The target volume is set as a secondary volume for

online data migration.

7010 8605

The Resync command was issued to a device in the

SMPL status.

Check the pair status.

7010 8606

A new pair was created with an S-VOL forming the

Hitachi TrueCopy cooperation pattern.

Check the volume number for the pair creation,

or delete the Remote Copy pair.

I 0

7010 8607

A pair status cannot be changed to form the Hitachi

TrueCopy cooperation pattern.

Place the TC390 pair which uses the SI390 T-

VOL as an S-VOL in the PSUE or SMPL status.

I 0

7010 8608

The specified volume is an S-VOL.

Refresh the screen, and retry the operation.

7010 8609

The specified volume is not set as a reserved volume.

7010 8610

The S-VOL is a source volume for hierarchical control. Check the corresponding condition.

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands