Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Page: 17 / 82

Hitachi Lightning 9900™ V Series Remote Console Error Codes 9
0003 1126 The Command Device cannot be set within a LUSE
volume. Select another volume.
Correct the specified contents, and request
again.
E 5
0003 1127 An error occurred. If this problem persists, please call
the Support Center.
Subsystem ID, which is required for Virtual
LVI/LUN operation, is not set. The error does not
occur normally because it is guarded in the
screen. Contact the program maker.
E 2
0003 1128 An error occurred. If this problem persists, please call
the Support Center.
SVP and DKC are processing Virtual LVI/LUN.
Wait for a while, and request the setting of the
configuration information again.
E 2
0003 1129 An error occurred. If this problem persists, please call
the Support Center.
SVP or DKC micro program cannot execute the
request. (The version cannot execute the
request.) If the same error occurs despite
retrying, call the service personnel.
E 2
0003 1130 The specified name is the same as the system default
name. Please change the name.
Correct the specified contents, and request
again.
E 6
0003 1131 An error occurred. If this problem persists, please call
the Support Center.
The CU numer specified in Virtual LVI/LUN
operation and LDEV number overlap with other
volume number. The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 1132 An error occurred. If this problem persists, please call
the Support Center.
The directory of MIB management information
does not exist. Contact the Hitachi Data Systems
Support Center.
E 2
0003 1133 An error occurred. If this problem persists, please call
the Support Center.
The emulation type is specified incorrectly in
Virtual LVI/LUN operation. The error does not
occur normally because it is guarded in the
screen. Contact the program maker.
E 2
0003 1134 An error occurred. If this problem persists, please call
the Support Center.
The emulation type of a volume which links as an
expanded LU is not Open volume. The error
does not occur normally because it is guarded in
the screen. Contact the program maker.
E 2
0003 1135 An error occurred. If this problem persists, please call
the Support Center.
The emulation type of a volume which links as an
expanded LU is not the same. The error does
not occur normally because it is guarded in the
screen. Contact the program maker.
E 2
0003 1136 An error occurred. If this problem persists, please call
the Support Center.
The instruction of the whole volume in
FlashAccess is specified to the mainframe
volume. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
0003 1137 An error occurred. If this problem persists, please call
the Support Center.
The method of specifying FlashAccess setting
place and the volume type do not match. (LBA
number is specified to main frame volume.
Cylinder number /header number is specified to
Open volume.) The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 1201 Invalid components for High Speed mode. The
specified port cannot be changed to High Speed
mode.
Change the parameter to a path where the high-
speed mode can be set, and request again.
E 5
0003 1203 An error occurred. If this problem persists, please call
the Support Center.
The number of LDEV ID which can be set in
Virtual LVI/LUN operation is exceeded. The error
does not occur normally because it is guarded in
the screen. Contact the program maker.
E 2