66
Chapter 1 Error Codes
7110 8518
You cannot create a pair, because the track format is
different for each. Make sure that the specified
emulation type is the same for both.
Check the emulation type.
I
0
7110 8519
You cannot set a pair because the number of
cylinders is different for each. Make sure that the
capacity is the same for both.
Check the volume capacity.
I
0
7110 8520
You cannot set a pair, because the volume type is
different for each.
Specify the volume with the same emulation
type, and retry the operation.
I 0
7110 8521
The number of multiple copy jobs exceeded the
maximum.
I
0
7110 8522
The emulation type of the S-VOL is not supported.
Specify the emulation type supported in
ShadowImage.
I 0
7110 8523
The emulation type of T-VOL is not supported.
Specify the emulation type supported in
ShadowImage.
I 0
7110 8524
The emulation type is not supported.
Specify the emulation type supported in
ShadowImage.
I 0
7110 8525
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8526
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8527
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8528
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8529
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8530
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8531
Internal logical error.
Contact Hitachi Data Systems Support Center. I
0
7110 8532
The S-VOL and T-VOL are being used from the host
or by Remote Copy.
Check the target volume, or stop using it in
Remote copy.
I 0
7110 8533
The emulation type of the specified reserved volume
is not supported.
Specify the emulation type of the supported
volume.
I 0
7110 8534
An internal logical contradiction occurred.
Contact Hitachi Data Systems Support Center. I
0
7110 8535
A processor failure was detected.
Contact Hitachi Data Systems Support Center. I
0
7110 8536
A cache failure was detected.
Contact Hitachi Data Systems Support Center. I
0
7110 8537
The cache capacities do not match.
Contact Hitachi Data Systems Support Center. I
0
7110 8538
An SM failure was detected.
Contact Hitachi Data Systems Support Center. I
0
7110 8539
There is insufficient shared memory to create 4096
pairs.
There is insufficient shared memory in DKC.
Contact Hitachi Data Systems Support Center.
I 0
7110 8540
There is sufficient shared memory to create 4096
pairs, but initial subsystem setup is required before
creating pairs.
Contact Hitachi Data Systems Support Center. I
0
7110 8541
There is sufficient shared memory to create 4096
pairs, and the initial subsystem setup is complete.
I
0
7110 8542
Failed to complete the initial shared memory setup.
Contact Hitachi Data Systems Support Center. I
0
7110 8543
The shared memory size is different.
Contact Hitachi Data Systems Support Center. I
0
7110 8544
16 Mbytes of shared memory are available.
I
0
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
