Hitachi Lightning 9900™ V Series Remote Console Error Codes
71
7110 8650
The boot device and the S-VOL do not match in the
AddPair, Resync, or DeletePair command.
Check the specified volume number.
I
0
7110 8651
The SSID is invalid.
I
0
7110 8652
The boot device is not an S-VOL nor T-VOL.
Check the target volume number.
I
0
7110 8653
Because the boot device is the S-VOL in the
DeletePair command, the flag does not match.
Check the target volume number.
I
0
7110 8654
The boot device and the T-VOL do not match in the
AddPair, Resync, or DeletePair command.
Check the target volume number.
I
0
7110 8655
An invalid secondary SSID is specified for the AddPair
or Resync command.
I
0
7110 8656
An invalid secondary SSID is specified for the
DeletePair or Split command.
I
0
7110 8657
The Swap&Freeze option cannot be specified,
because the mode is invalid.
Check the setting you specified in Option tab.
I
0
7110 8658
Some settings could not be applied normally. Refer to
the error code.
Check the error code in Preset volume list.
E
0
7110 8659
There is no volume.
I
0
7110 9002
Normal end.
The operation was ended normally. Execute the
next operation.
I 0
7110 9005
An error occurred. Check the error code.
An error occurred during the indicated operation.
Refer to the error code for each operation in
Preset Volume List.
I 0
7110 9101
Do you want to cancel?
To cancel, press the OK button.
I
0
7110 9102
Do you want to apply?
To execute the operation in Preset, press the OK
button.
I 0
7110 9108
The option has been changed. If you continue
processing before applying the change, the option will
be reset to the current setting. Do you want to
continue processing?
W
0
7110 9109
Do you want to execute the Set Over operation?
W
2
7110 9110
Do you want to execute the Initialize operation?
W
2
8005 3003
An error occurred. If this problem persists, please call
the Support Center.
When host mode is set, the maximum value you
can set in the PORT is exceeded. The error does
not occur normally because it is guarded in the
screen. Contact the program maker.
E 2
8005 5099
An error occurred. If this problem persists, please call
the Support Center.
You have not specified the value when
registering WWN. Or zero is set as the WWN
value. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
8005 6023
An error occurred. If this problem persists, please call
the Support Center.
E
2
8005 6040
An error occurred while connecting to the subsystem.
Please retry a little later.
Call the service personnel.
E
6
8005 6050
An error occurred. If this problem persists, please call
the Support Center.
Call the service personnel.
E
2
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
