Hitachi Lightning 9900™ V Series Remote Console Error Codes
55
6010 9112
Do you want to continue this operation?
If you want to continue the current operation,
select OK. If not, select Cancel.
I 0
6010 9113
Are you sure you want to clear SIMs of Remote Copy. If you want to clear the remote copy related SIM,
select OK. If not, select Cancel.
W 0
6010 9114
The value has been changed. Do you want to
continue the operation?
If you want to continue the process, select OK. If
not, select Cancel.
I 0
6010 9154
As the result of this operation, you will not be able to
re-start ERASE R-VOL operation. To delete the pair
forcibly, please try again with 'Force' option.
The same as the message.
W
0
6010 9300
WARNING: Destination volume of specified volume
pair may contain some inconsistency, because
volume copy is not completed yet. Full volume
initialization is required before re-using it.
The same as the message.
W
0
6010 9301
WARNING: Through this operation, M-VOL status will
be changed to SMPL status forcibly, but R-VOL status
will not be changed. If you do this operation, please
change the R-VOL status to SMPL later.
The same as the message.
W
0
6010 9302 There
are
no
RCP ports.
Set the port to RCP before registering RCU.
W
0
6010 9303
There are no valid volumes.
There is no valid volume. Check the device
emulation and the definition of the SCSI path (for
TrueCopy).
W 0
6010 9304
WARNING: ""Group" "or ""C/T"" is specified for Delete
Range. Confirm all pairs in the group are
synchronized. If some volumes are not synchronized,
full volume initializations are required before re-using
them.
The same as the message.
W
0
6010 9305
There are no initiator ports.
Set the port to Initiator before registering RCU. W
0
6010 9306
The Remote Copy function is not installed in this
controller. You cannot create pairs.
There is no remote copy license. Set the license. W
0
6010 9307
You specified the same volumes more than once. The
duplicate occurrences were excluded.
Since the same volume where multiple paths are
defined was selected, the overlapped one was
eliminated. Press the OK button and continue.
W 0
6010 9308
You set same path more than once. The same paths
are excluded.
Since there were overlapped paths in the added
paths, the overlapped ones were eliminated.
Press the OK button and continue.
W 0
6010 9309
All paths which you set have already been registered.
This operation will finish forcibly because there is no
paths which can be added.
Since all the added paths are overlapped, the
operation of adding paths cannot be executed.
Press the OK button and continue.
W 0
6010 9310
You set the same SSID more than once. The
duplicate SSIDs are excluded.
Since there were overlapped SSIDs in the added
SSIDs, the overlapped ones were eliminated.
Press the OK button, and continue.
W 0
6010 9311
All SSIDs which you set have already been registered.
This operation will finish forcibly because there is no
SSID which can be added.
Since all the added SSIDs are overlapped, the
operation of adding SSIDs cannot be executed.
Press the OK button, and continue.
W 0
6010 9316
Through this operation, M-VOL status will be changed
to Simplex mode even if the M-VOL is online to the
host.
The same as the message.
W
0
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
