Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 77

Page: 77 / 82

Hitachi Lightning 9900™ V Series Remote Console Error Codes

7110 8601

The source volume cannot be paired with a backup

server volume.

7110 8602

The volume is already a reserved volume.

Specify other volume, and retry the operation. Or

release the Reserve attribute of the specified

volume, and then retry the operation.

I 0

7110 8603

The target volume is set as a primary volume for

online data migration.

7110 8604

The target volume is set as a secondary volume for

online data migration.

7110 8605

The Resync command was issued to a device in the

simplex status.

Check the pair status.

7110 8606

A new pair was created with an S-VOL forming the

Hitachi TrueCopy-S/390

cooperation pattern.

Place the SI390 pair in the SMPL status, or place

the TC390 pair which uses the SI390 T-VOL as

an S-VOL in the Simplex status.

I 0

7110 8607

A pair status cannot be changed to from the Hitachi

TrueCopy-S/390

cooperation pattern.

Place the TC390 pair which uses the SI390 T-

VOL as an S-VOL in the Suspended or Simplex

status.

I 0

7110 8608

The specified volume is a T-VOL.

Refresh the screen, and retry the operation.

7110 8609

The specified volume is not set as a reserved volume.

7110 8610

The T-VOL is a source volume for hierarchical control. Check the corresponding condition.

7110 8611

The specified volume is a target volume.

7110 8612

The specified volume is not a T-VOL.

7110 8613

The RAID level of the specified target volume is not

supported.

7110 8614

The target volume is used as a Remote Copy M-VOL. Delete the TrueCopy pair.

7110 8615

The target volume is used as a Remote Copy R-VOL. Delete the TrueCopy pair.

7110 8616

The target volume is used as a primary volume for

online data migration.

7110 8617

The target T-VOL is used as a secondary volume for

online data migration.

7110 8618

The requested T-VOL volume is already defined as an

S-VOL.

Check the volume number.

7110 8619

The target T-VOL is defined as a destination volume

for hierarchical control.

Check the corresponding condition.

7110 8620

The volume specified as a reserved volume is already

definedas a primary volume for online data migration.

7110 8621

The volume specified as a reserved volume is already

definedas a secondary volume for online data

migration.

7110 8622

The volume specified as a reserved volume is already

defined as a Remote Copy M-VOL.

Delete the TrueCopy pair.

7110 8623

The reserved volume is defined as a Remote Copy R-

VOL.

Delete the TrueCopy pair.

7110 8624

The selected volume is not paired.

Check the specified volume number.

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands