Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 68

Page: 68 / 82

Chapter 1 Error Codes

7010 8558

The volume cannot be used.

Contact Hitachi Data Systems Support Center,

and check if the volume status is normal.

I 0

7010 8559

The volume is being formatted.

Wait until the volume is formatted, and retry the

operation.

I 0

7010 8560

The volume is command device.

Check the target volume.

7010 8561

The command code is invalid.

7010 8562

The command code sender is invalid.

7010 8563

The volume type is invalid.

7010 8564

The volume type is invalid.

7010 8565

The command code sender is invalid.

7010 8566

The attribute of the reserved volume is invalid.

7010 8567

The number of effective lists is invalid.

7010 8568

The emulation type is invalid.

Specify the volume of the supported emulation

type.

I 0

7010 8569

The number of multiple jobs exceeded the maximum. Contact Hitachi Data Systems Support Center. I

7010 8570

The selected volume does not exist.

Refresh the screen, and retry the operation.

7010 8571

The volume is already defined as a reserved volume.

7010 8572

The volume is already defined as a P-VOL.

7010 8573

The volume is defined as a source volume for

hierarchical control.

Check the corresponding condition.

7010 8574

The volume is defined as a destination volume for

hierarchical control.

Check the corresponding condition.

7010 8575

The selected volume is not a reserved volume.

7010 8576

No reserved volume is available for use.

7010 8577

The number of reserved volumes to be defined

exceeds the maximum.

Stop the operation of the Reserve volume

setting, or delete the Reserve volume.

I 0

7010 8578

The P-VOL is already paired with a backup volume.

The P-VOL cannot be paired with the target volume.

7010 8579

No volume is defined as a reserved volume.

Define the reserve volume, and then retry the

operation.

I 0

7010 8580

The specified volume is for backup servers only.

You cannot use the volume. Specify other

volume, and retry the operation.

I 0

7010 8581

The specified volume is not for backup servers only.

7010 8582

The emulation type of the target volume is being

changed.

Wait for a while, and retry the operation.

7010 8583

The RAID level of the specified volume is not

supported.

Specify a volume of the supported RAID level.

7010 8584

No volume is defined as a reserved volume.

7010 8585

The number of reserved volumes exceeds the

maximum.

Stop the operation of the Reserve volume

setting, or delete the Reserve volume.

I 0

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands