Hitachi Freedom Storage Lightning 9900 V series Error Code List Download Page 76

Page: 76 / 82

Chapter 1 Error Codes

7110 8575

The selected volume is not a reserved volume.

7110 8576

No reserved volume is available for use.

7110 8577

The number of reserved volumes to be defined

exceeds the maximum.

Stop the operation of the Reserve volume

setting, or delete the Reserve volume.

I 0

7110 8578

The S-VOL is already paired with a backup volume.

The S-VOL cannot be paired with the target volume.

7110 8579

No volume is defined as a reserved volume.

Define the reserve volume, and then retry the

operation.

I 0

7110 8580

The specified volume is for backup servers only.

You cannot use the volume. Specify other

volume, and retry the operation.

I 0

7110 8581

The specified volume is not for backup servers only.

7110 8582

The emulation type of the target volume is being

changed.

Wait for a while, and retry the operation.

7110 8583

The RAID level of the specified volume is not

supported.

Specify the volume of the supported RAID level. I

7110 8584

No volume is defined as a reserved volume.

7110 8585

The number of reserved volumes exceeds the

maximum.

Stop the operation of the Reserve volume

setting, or delete the Reserve volume.

I 0

7110 8586

The number of groups that can be set in the same

subsystem is invalid.

7110 8587

The number of pairs that can be set in the same group

is invalid.

7110 8588

The specified group number is not set.

7110 8589

The specified group name is invalid.

7110 8590

The group name and the number do not match.

7110 8591

The specified pair is already set in another group.

7110 8592

The command was rejected, because the licensed

capacity was exceeded.

Check the capacity of the installed license key. If

you need to create more pairs, purchase a

license key for larger capacity.

I 0

7110 8593

The S-VOL is a source volume for hierarchical control. Check the corresponding condition.

7110 8594

The S-VOL is a destination volume for hierarchical

control.

Check the corresponding condition.

7110 8595

The specified S-VOL does not exist.

Refresh, and then retry the operation.

7110 8596

The specified volume is a reserved volume.

7110 8597

No more pairs can be created for the specified S-VOL. You cannot create pair for the S-VOL anymore.

Delete the existing pairs.

I 0

7110 8598

The specified volume is not an S-VOL.

7110 8599

The specified volume is already an S-VOL.

Specify other P-VOL, and retry the operation. Or

delete the pair of the specified volume, and then

retry the operation.

I 0

7110 8600

The RAID level of the specified volume is not

supported.

Check the RAID level, and specify a volume of

the supported RAID level, and then retry the

operation.

I 0

Summary of Contents for Freedom Storage Lightning 9900 V series



















































































Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands

Hitachi Freedom Storage Lightning 9900 V series, Error Code List

Search results

Summary of Contents for Freedom Storage Lightning 9900 V series

Reviews:

Related manuals for Freedom Storage Lightning 9900 V series

Brands by name

Popular brands