Hitachi AMS 2100 Page 21 Service Manual Download

Page: 21 / 192

Safety guidelines

xxi

Hitachi AMS 2000 Family Storage System Service Guide

WARNING!
• Do not perform any action that creates a potential hazard to people or

makes the equipment or rack unsafe.

• Perform operations in accordance with the procedures in this manual.
• Follow the safety statements in this manual and on the labels attached

to the array.

• Do not wear loose clothing that could get caught in the chassis or

mounting hardware.

• Wear safety glasses when working under conditions that are hazardous

to your eyes.

• Do not work on the equipment or disconnect cables during a

thunderstorm, when wearing a wool sweater or other heavy wool

clothing, or when power is applied.

• Avoid hazards such as moist floors.
• The hard disk drives in the array contain a class 1 laser system that

does not emit a hazardous laser beam.

• Tie up long hair before working with the equipment.
• Do not power on any device with rotating or moving parts that are not

properly covered unless instructed to do so.

Summary of Contents for AMS 2100

































































































































































































Search results

Summary of Contents for AMS 2100

Reviews:

Related manuals for AMS 2100

Brands by name

Popular brands

Hitachi AMS 2100, Service Manual

Search results

Summary of Contents for AMS 2100

Reviews:

Related manuals for AMS 2100

Brands by name

Popular brands