Chapter IV Function Parameter Table
79
Parameter
Code
Parameter
name
Parameter detailed description
Minimum
Unit
Factory
value
Change
3: Continuous cycle: The drive will
automatically start the next cycle after
completing one cycle, till there’s a stop
command.
4: DI selection operation: Determine
the current operation stage by selecting
the ON/OFF combination of input
terminal functions 12~15. For the
combination method, please refer to No.
12~15 function description of group F6
multifunctional input terminals.
LED tens digit: Start mode
0: Restart from the first stage: Stop
during operation (caused by stop
command, fault or power failure), and
start from the first stage after restart.
1: Continue operation from the stage
of interruption: Stop during operation
(caused by stop command or fault), the
drive automatically records the run time
of the current stage, and automatically
enters this stage after restarting, and
continues the operation in the remaining
time at the frequency defined by this
stage.