Chapter V Basic Operation Instructions
123
Parameter
Code
Parameter
name
Parameter detailed description
Minimum
Unit
Factory
value Change
selection
Fd.13
VDO4
terminal
function
selection
1
0
×
Fd.14
VDO5
terminal
function
selection
1
0
×
Fd.15
VDO1
output on
delay
Same as F6.29
～
F6.34 function code
setting.
0.1s
0.0s
○
Fd.16
VDO2
output on
delay
0.1s
0.0s
○
Fd.17
VDO3
output on
delay
0.1s
0.0s
○
Fd.18
VDO4
output on
delay
0.1s
0.0s
○
Fd.19
VDO5
output on
delay
0.1s
0.0s
○
5.8 Simple PLC
The simple PLC function is a multistage speed generator. The drive can automatically change
the operation frequency and direction according to the run time to meet the process requirements.
This function used to be completed under the assistance of an external PLC. Now it can be realized
by the drive itself.
This series of drives can realize 16-stage speed control, and there are 4 groups of
acceleration/deceleration time for selection.
When the set PLC completes a cycle (or a stage), an ON signal can be output from the open
collector output terminal or relay.
Related parameter table:
Parameter
Code
Parameter
name
Parameter detailed description
Minimum
Unit
Factory
value Change
F9.00
Simple
PLC run
mode
LED single digit: PLC run mode
0: No action
1: Stop after a single cycle
1111
0004
×