Hill-Rom RESIDENT P872 Service Manual Download Page 91

Page: 91 / 178

4.1 Floor Lock Brake

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 3

4.1

Floor Lock Brake

Tools required:

Blue Loctite®

adhesive (P/N SA3618)

5/16" Torx®

driver bit

Jack stand

Removal

1. Move the bed to a convenient working location.

2. Place a jack stand beneath the frame to raise it high enough to remove the

floor lock brake (A) (see figure 4-1 on page 4-3).

Figure 4-1. Floor Lock Brake

3. Using a 5/16" Torx® driver bit, remove the four locknuts (B) that secure

the four carriage bolts (C).

4. Remove the four carriage bolts (C) that secure the floor lock brake (A).

5. Remove the floor lock brake (A).

1. Loctite® is a registered trademark of Loctite Corporation.
2. Torx® is a registered trademark of Textron, Inc.

m259_025

Summary of Contents for RESIDENT P872



















































































































































































Search results

Summary of Contents for RESIDENT P872

Reviews:

Hill-Rom RESIDENT P872, Service Manual, Page: 91 / 178

Search results

Summary of Contents for RESIDENT P872

Reviews: