manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 104 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 104

4.6  Base Frame Components

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 16

RESIDENT® Low Bed Service Manual (man259)

CAUTION:

Before attempting to turn the RESIDENT® Low Bed over, secure the 
head and foot sections to the mid-frame. Failure to do so could result in 
damage to equipment or personnel.

6. Using a safety strap, secure the head and foot sections to the mid-frame.

WARNING:

The RESIDENT® Low Bed weighs 275 lb (125 kg). Have two or more 
people who can help you lift and turn the bed. Failure to do so could 
result in personal injury.

CAUTION:

Do not roll the RESIDENT® Low Bed to turn it over. Lift and turn the 
bed upside down. Failure to do so could result in damage to the 
siderails.

7. Have two or more people help you lift and turn the bed upside down for 

access to the base components.

NOTE:
Remove or disconnect only the components necessary to replace a damaged 
part.

NOTE:
The intermediate frame, itself, is not field replaceable. The intermediate frame 
contains the unit’s serial number, which cannot be changed or transferred.

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments