Hill-Rom RESIDENT P872, Service Manual, Page: 74 / 178

2.9 Automatic Contour Malfunction
Chapter 2: Troubleshooting Procedures
Page 2 - 44 RESIDENT® Low Bed Service Manual (man259)
Figure 2-22. Lockout Controls
Press and hold the head up button (A) on the hand pendant (see figure 2-18 on
page 2-39).
The bed stays still.
Yes No
↓ →
If any section of the bed moves, replace the electrical
control/lockout box (D) (refer to procedure 4.9).
8. Press and hold the head down button (B) on the hand pendant.
The bed stays still.
Yes No
↓ →
If any section of the bed moves, replace the electrical
control/lockout box (refer to procedure 4.9).
9. At the electrical control/lockout box (D), unlock the head actuator lockout
(J) (i.e., the button is out), and lower the head and knee sections to their full
flat position (see figure 2-22 on page 2-44).
At the electrical control/lockout box (D), lock the knee actuator lockout (K)
(i.e., the button is in).
m259_031