Hill-Rom RESIDENT P872, Service Manual, Page: 45 / 178

Function Checks
Chapter 2: Troubleshooting Procedures
RESIDENT® Low Bed Service Manual (man259) Page 2 - 15
2
Yes No
↓ →
If the bed moves, replace the electrical control/lockout box (go
to procedure 4.9).
29. Push the knee up button (AD) on the hand pendant.
The knee section begins to rise, and the head section remains stationary.
Yes No
↓ →
If the knee section does not move, go to RAP 2.6. If the head
section rises, go to RAP 2.9.
30. Lower the knee section to the full flat position.
At the electrical control/lockout box at the foot of the bed, push in the knee
lockout button (AN) (see figure 2-6 on page 2-14). Then press the knee up
button (AD) on the hand pendant (see figure 2-3 on page 2-9).
The unit stays still.
Yes No
↓ →
If the bed moves, replace the electrical control/lockout box. Go
to procedure 4.9.
31. At the foot of the bed, unlock the head up/down function (button AM is
out) (see figure 2-6 on page 2-14).
32. Press the head up button on the hand pendant.
The head section begins to rise, but the knee section remains flat.
Yes No
↓ →
If the head does not rise, go to RAP 2.6. If the knee section
begins to rise, go to RAP 2.9.
33. Go to “Final Actions” on page 2-16.