Hill-Rom RESIDENT P872, Service Manual, Page: 43 / 178

Function Checks
Chapter 2: Troubleshooting Procedures
RESIDENT® Low Bed Service Manual (man259) Page 2 - 13
2
22. Press and hold the siderail head down control button (AI) until the unit
stops by itself.
The head section begins to lower. When the head section reaches an angle
of approximately 25°, the knee section begins to lower. Both sections
lower smoothly until they are flat (parallel to the floor).
Yes No
↓ →
Go to RAP 2.9.
23. Press and hold the knee up control button (AJ) until the unit stops by itself.
The head and knee sections rise simultaneously. The knee section stops
rising when it reaches an angle of approximately 15°, but the head section
continues to rise until it reaches an angle of 25°.
Yes No
↓ →
Go to RAP 2.9.
24. Press and hold the knee down control button (AK) until the unit stops by
itself.
The head and knee sections lower smoothly until they are flat (parallel to
the floor).
Yes No
↓ →
Go to RAP 2.9.
25. At the electrical control/lockout box at the foot of the bed, push in the
hilow lockout button (AL) (see figure 2-6 on page 2-14).