Hill-Rom RESIDENT P872 Service Manual Download Page 95

Page: 95 / 178

4.3 Central Lock Casters

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 7

4.3

Central Lock Casters

Tools required:

Blue Loctite®

adhesive (P/N SA3618)

Phillips head screwdriver
¼" Allen™

wrench

Jack stand

Removal

1. Move the bed to a convenient working location.

2. Place a jack stand beneath the frame to raise it high enough to remove the

caster.

NOTE:
Do not remove the round tube plug in the base pedal lock weldment to remove
the locking mechanism. However, inspect the tube plug each time the central
lock casters are serviced. Replace the plug only if it is loose or damaged.

3. Inspect the round tube plug (A) and, if damaged, remove it (see figure 4-3

on page 4-8).

1. Loctite® is a registered trademark of Loctite Corporation.
2. Allen™ is a trademark of Industrial Fasteners, Inc.

Summary of Contents for RESIDENT P872



















































































































































































Search results

Summary of Contents for RESIDENT P872

Reviews:

Hill-Rom RESIDENT P872, Service Manual, Page: 95 / 178

Search results

Summary of Contents for RESIDENT P872

Reviews: