Hill-Rom RESIDENT P872 Service Manual Download Page 99

Page: 99 / 178

4.4 Siderail

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 11

Figure 4-4. Siderail

7. Raise the siderail (C).

8. Support the siderail (C), and remove the two Torx®

screws (D) using the

5/16" Torx® bit.

9. Remove the siderail (C) and mounting plate (E) from the frame.

Replacement

NOTE:
Siderails are available as patient-left and patient-right head and foot models.
Ensure that you have the correct siderail model for the application.

1. Align the mounting holes in the siderail (C) with the holes in the mounting

plate (E).

2. Ensure that the guide pins (F) on the mounting plate (E) correctly enter the

holes in the frame.

3. Install the Torx® screws (D), and tighten them securely.

1. Torx® is a registered trademark of Textron, Inc.

m259_034

Summary of Contents for RESIDENT P872



















































































































































































Search results

Summary of Contents for RESIDENT P872

Reviews:

Hill-Rom RESIDENT P872, Service Manual, Page: 99 / 178

Search results

Summary of Contents for RESIDENT P872

Reviews: