manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 92 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 92

4.1  Floor Lock Brake

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 4

RESIDENT® Low Bed Service Manual (man259)

Replacement

1. Ensure that the floor lock pedal faces away from the bed.

2. With the floor lock pedal (D) to the outside of the bed, align the holes in the 

floor lock brake (A) with those in the bed floor lock support (E).

3. Apply blue Loctite®

1

 adhesive to the threads of the four carriage bolts (C), 

and insert them through the floor lock support (E) and the floor lock brake 
(A).

WARNING:

Do not reuse locknuts. Failure to use a new locknut could allow the floor 
lock to loosen and fail. This could result in injury to a resident or 
caregiver.

4. Using a 5/16" Torx®

2

 driver bit, install a new locknut (B) on each carriage 

bolt (C), and tighten securely.

5. To ensure proper operation of the RESIDENT® Low Bed, perform the 

“Function Checks” on page 2-4.

1. Loctite® is a registered trademark of Loctite Corporation.
2. Torx® is a registered trademark of Textron, Inc.

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments