manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 124 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 124

4.12  Head Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 36

RESIDENT® Low Bed Service Manual (man259)

Replacement

1. Align the hole in the tip of the head actuator (C) rod between the holes in 

the head section support brace (I).

2. Insert a clevis pin (H) through the aligned holes, and secure it with a rue 

ring (G).

3. Lift the head actuator (C) motor, and align the hole in the support knob 

with the holes in the frame bracket.

4. Insert a clevis pin (F) through the aligned holes, and secure it with a rue 

ring (E) (see figure 4-14 on page 4-35).

5. Route the head actuator (C) cable along the same path it was removed 

from, and secure the head actuator (C) cable to the frame with cable ties 
(D).

6. Insert the head actuator plug (A) into the appropriate port on the electrical 

control/lockout box (B).

7. To ensure proper operation of the RESIDENT® Low Bed, perform the 

“Function Checks” on page 2-4.

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments