manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 86 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 86

Theory of Operation

Chapter 3: Theory of Operation

Page 3 - 10

RESIDENT® Low Bed Service Manual (man259)

Figure 3-7.  Hand Pendant

Six graphically identified buttons on the hand pendant (Q) provide control over 
all of the electrically operated functions. The lockout control for a function 
must be off for the function to operate.

• Head up (R)

• Head down (S)

• Knee up (T)

• Knee down (U)

• Hilow up (V)

• Hilow down (W)

The hand pendant (Q) has no serviceable parts.

Siderail Controls

Function controls are located on panels mounted in both head end siderails. 
The control panels connect to the junction box with plug-in cords. 

Other graphically identified buttons are located on the inside and outside of the 
siderail control panels (see figure 3-8 on page 3-11). The inside control buttons 

m259_023

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments