Hill-Rom RESIDENT P872, Service Manual, Page: 112 / 178

4.8 Power Cord
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 24 RESIDENT® Low Bed Service Manual (man259)
WARNING:
The bed is always energized when connected to a power source.
Unplug the unit from its power source. Failure to do so could result in
inadvertent movement of the bed and could cause personal injury.
4. Unplug the unit from its power source.
5. Using a screwdriver, pry the plug lock (I) from the plug ports on the
electrical control/lockout box (D) (see figure 4-9 on page 4-24).
Figure 4-9. Power Cord
6. Unplug the power cord (E) from the electrical control/lockout box (D).
7. Cut wire ties (F) along the frame.
8. Using a screwdriver, remove the screw (G) that secures the speed clamp
(H) to the frame.
9. Remove the power cord (E) from the frame.
m259_037