Page | 52
Diagnostics
The system diagnostics are available for all parts of the system, including any remote power
supplies if fitted. The diagnostic resolution is:
Voltage: 0.1V
Current: 0.01A
The diagnostics that can be viewed are:
System voltage and current
at the control panel and at each individual power supply.
System voltage
at each keypad / tag reader.
Battery condition and charge current
at control panel or any remote power supply.
Display inputs
– current state of all inputs connected to a single system component,
displayed in real time.
Calibration
– permits calibration of control panel PSU voltage, using a calibrated meter.
View Wireless Device Status
– If a wireless expander is installed (and wireless devices are
learnt), this menu will show the Signal Strength of individual Inputs/Bells, Battery status etc.
Diagnostics
Using the
and
keys,
scroll to
‘DIAGNOSTICS?
’
Press the
key
View PSU’s
To view the diagnostics of the
power supplies on each device
press the
key.
The Endstation PSU statistics will
be displayed. You can press the
or arrow keys to display
more information if available,
then Press the
key.
Enter the address of the ZEM you
wish to view. Repeat for each
ZEM. Press the
key.
Repeat for the output modules,
Keypads and Readers you have
on the system, press the
key, then press
for the
next item.
View Inputs
To view the diagnostics of the
inputs on the system press the
key.
To view the endstation inputs
press the
key.