Page | 42
ATE Pins
When the display shows “ATE pin”
you can decide what you would like
the ATE pins to be programmed as.
Select the output type for the ATE
pin and press the
key. Repeat
for each pin.
ZEM Ouputs?
Once you return to the sub-menu
‘Endstation Output’ press the
key, the display will show ‘ZEM
output’s’, press the
key.
Enter the address of the ZEM. Press
the
key.
Select the output type for the Output
and press the
key. Repeat for
each output (and ZEM address once
you have pressed the
key)
Wireless Bells
If any wireless bells are learnt on the
system. 2 outputs may be
programmed (defaulted to bell and
strobe). Press the
key for this,
or press the
key for the next
option.
Output Module
Once you return to the sub-menu
‘ZEM Output’ press the
key, the
display will show ‘Output module’,
press the
key if you have an
Output module installed.
OP Mod Address?
Select the address of the Output
Module and press the
key
Select the output type for the Output
and press the
key. Repeat for
each output (and OP Mod address
once you have pressed the
key)
Keypad Output?
Repeat for the Keypad Output. Press
the
key
Repeat for the Reader Output. Press
the
key
You will be returned to the Engineer
Menu.