HIKVISION Pyronix EURO 280, Programming Manual, Page: 40 / 72

Page | 40
Type Active Restore
0065
Monitor
Activity Fail
If an input with NAT timer active
does not trigger in the defined
period
Next valid code entry
0066 ATE not used Makes the ATE pin 5V or 0V depending if ATE outputs are inverted
0170
-
0199
User Defined
01-30
Can be used to trigger outputs via the keyfob. For example if an output
is programmed as type 0171 (User Defined Fob Output 02) and is
wired to a garage door. And if a user has a keyfob programmed with
button 2 as User Output (with Output 2 selected), then when the
button is pressed the garage door will open. – See Keyfob Button
programming and User Outputs menu to use these functions.
A repeating block of output types:
0202 Hold Up A
As 0002 for Area A / Level set A events only
0203 Intruder A As 0003 for Area A / Level set A events only
0204 Final Set A As 0004 for Area A / Level set A events only
0206 Confirmed A As 0006 for Area A / Level set A events only
0207 Tamper A As 0007 for Area A / Level set A events only
0208 Duress A As 0008 for Area A / Level set A events only
0209 HU Device A As 0009 for Area A / Level set A events only
0210 Fire Reset A As 0010 for Area A / Level set A events only
0213
Secure
Intruder A
As 0013 for Area A / Level set A events only
0214 Siren A As 0014 for Area A / Level set A events only
0216 Strobe A As 0016 for Area A / Level set A events only
0217
Omit At Rearm
A
As 0017 for Area A / Level set A events only
0218 Unconfirmed A As 0018 for Area A / Level set A events only
0219 Can Set A As 0019 for Area A / Level set A events only
0220 Exit Starts A As 0020 for Area A / Level set A events only
Then this pattern repeats for each other area, so that:
0221-0240
Area / Level set B 0361-0380 Area / Level set 4
0241-0260 Area / Level set C 0381-0400 Area / Level set 5
0261-0280 Area / Level set D 0401-0420 Area / Level set 6
0281-0300 Area / Level set 0 0421-0440 Area / Level set 7
0301-0320 Area / Level set 1 0441-0460 Area / Level set 8
0321-0340 Area / Level set 2 0461-0480 Area / Level set 9
0341-0360 Area / Level set 3
0600-0609 = Timer 1 - 10
0610-0619 = Calendar 1 - 10
0620-0639 = Logic Gate 1 - 20
0640-0649 = Delay 1 - 10
1xxx Follow input xxx
When input is
activated
When input clears
i.e. add 1000 to the input number to select output required
Area Sounder
At output 2 of the TMZ (fixed as
loudspeaker)
At Default
Output 1: Not Used, Output 2: Not Used, Strobe O/P: Strobe Any (0016),
Siren O/P: Siren Any (0014)