Page | 48
Review Logs
There are two logs available on the EURO 280 system:
The Panel Log:
Includes all Set, Unset and Alarm events. The code holder performing any
operation may be identified by pressing the
key. The panel log also includes all system
faults, details of engineer access etc.
The Access Log:
Includes all Access Control and Guard Tour events.
With each log entry, use the
key to move from one event to the previous event. The
key will move from one event to the next event that occurred.
To view additional details, press the
key. If no other information is available, the display
will move to the next log entry. Pressing the
key will return to the main screen for that
entry.
Information on all fault codes that appear in the log can be seen on page: 68.
4.1.47 Log Entries
EURO 280: 1000(M), 500(A), 500(O)
M=Mandatory, A = Access, O = Optional
4.1.48 Code Identification
The codes that are entered into the EURO 280 system are identified as follows:
Code
Identity
Engineer Code
Default:
1111
Engineer
Master Manager Code
Default:
2222
Master Manager
User (Or Manager),
Default:
1234
Users programmed through the Master Manager
menu.
Duress (or Guard)
Codes programmed through the Engineer Menu.
“Input Switched”
Key or other switch used through an input
4.1.49 Fault Codes
Please note a list of all the fault codes and log meanings are shown on page: 68.
Review Logs
Using the
and
keys, scroll to
‘REVIEW LOGS?
’
Press the
key
Panel Log
Press the
key to view the panel
log.