HIKVISION DS-K1T605 Series, User Manual

Page: 46 / 107

Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
Information.
3. Click Add Face in the Basic Information panel.
4. Select Take Photo.
5. Connect the face scanner to the PC running the client.
6. Optional: Enable Verify by Device to check whether the facial
recognition device managed in the client can recognize the face
in the photo.
7. Take a photo.
1) Face to the webcam of the PC and make sure your face is in
the middle of the collecting window.
2) Click to capture a face photo.
3) Optional: Click to capture again.
4) Click OK to save the captured photo.
8. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons.
9.1.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access
control device added to the client which supports facial
recognition function.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
Information.
3. Click Add Face in the Basic Information panel.
4. Select Remote Collection.
5. Select an access control device which supports face recognition
function from the drop-down list.
6. Collect face.
1) Face to the camera of the selected access control device and
make sure your face is in the middle of the collecting
window.
2) Click to capture a photo.
3) Click OK to save the captured photo.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons .
37