HIKVISION DS-K1T605 Series, User Manual

Page: 55 / 107

Card Enrollment Station
Select the model of the connected card enrollment station
Note
Currently, the supported card enrollment station models
include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-
K1F180-D8E.
Card Type
This field is only available when the model is DS-K1F100-D8E or
DS-K1F180-D8E.
Select the card type as EM card or IC card according to the
actual card type.
Serial Port
It is only available when the model is DS-K1F100-M.
Select the COM the card enrollment station connects to.
Buzzing
Enable or disable the buzzing when the card number is read
successfully.
Card No. Type
Select the type of the card number according to actual needs.
M1 Card Encryption
This field is only available when the model is DS-K1F100-D8,
DS-K1F100-D8E, or DS-K1F180-D8E.
If the card is M1 card, and if you need to enable the M1 Card
Encryption function, you should enable this function and select
the sector of the card to encrypt.
Remote Mode: Issue Card by Card Reader
Select an access control device added in the client and swipe the
card on its card reader to read the card number.
9.2 Configure Schedule and Template
You can configure the template including holiday and week
schedule. After setting the template, you can adopt the
configured template to access groups when setting the access
groups, so that the access group will take effect in the time
durations of the template.
Note
For access group settings, refer to Set Access Group to Assign
Access Authorization to Persons.
9.2.1 Add Holiday
You can create holidays and set the days in the holidays, including
start date, end date, and holiday duration in one day.
Perform this task when you need to add a holiday to pre-define
the holidays.
Steps
Note
You can add up to 64 holidays in the software system.
46