1) Click Set Rule to open the Set Output Transformation Rules
window.
Figure 9-2 Set Output Transformation Rule
2) Select rules on the left list.
The selected rules will be added to the right list.
3) Optional: Drag the rules to change the rule order.
4) Click OK.
5) In the Custom Wiegand tab, set the rule's start bit, length,
and the decimal digit.
7. Click Save.
9.4.5 Configure Card Reader Authentication Mode
and Schedule
You can set the passing rules for the card reader of the access
control device according to your actual needs.
Perform this task if you need to configure the card reader's
authentication mode and schedule.
Steps
1. Click Access Control Advanced Function Authentication to
enter the authentication mode configuration page.
2. Select a card reader on the left to configure.
3. Set card reader authentication mode.
1) Click Configuration.
Figure 9-3 Select Card Reader Authentication Mode
Note
PIN refers to the PIN code set to open the door. Refer to
Configure Access Control Information.
2) Check the modes in the Available Mode list and they will be
added to the selected modes list.
3) Click OK.
After selecting the modes, the selected modes will display as
icons with different color.
61
Summary of Contents for DS-K1T605 Series
Page 1: ...Face Recognition Terminal UD07930B E...
Page 104: ...95...
Page 105: ...C Relationship between Device Height Person Height and Standing Distance 96...
Page 107: ...E Dimension 98...
