HIKVISION DS-K1T605 Series, User Manual

Page: 83 / 107

The real-time capture will be triggered.
Recording
The recording will be triggered.
Note
The device should support recording.
Alarm Output
The alarm output will be triggered for notification.
Alarm Input
Arm or disarm the alarm input.
Note
The device should support alarm input function.
Access Point
The door status of open, close, remain open, or remain
closed will be triggered.
Audio Play
The audio prompt will be triggered. And the select audio
index related audio content will be played according to the
configured play mode.
7. Click Save to save the settings.
8. Optional: After adding the device linkage, you can do one or
more of the following:
Edit Linkage
Settings
Select the configured linkage settings in the
device list and you can edit its event source
parameters, including event source and
linkage target.
Delete
Linkage
Settings
Select the configured linkage settings in the
device list and click Delete to delete it.
9.5.5 Configure Device Actions for Person ID
You can set the access control device's linkage actions for the
specified person ID. When access control device detects the
specified person ID, it can trigger the alarm output, host buzzer,
and other actions on the same device.
Steps
Note
It should be supported by the device.
1. Click Access Control Linkage Configuration .
2. Select the access control device from the list on the left.
3. Click Add button to add a new linkage.
4. Select the event source as Person Linkage.
5. Enter the employee number or select the person from the
dropdown list.
6. Select the card reader where the card swipes to trigger the
linked actions.
74