HIKVISION DS-K1T605 Series, User Manual

Page: 23 / 107

8 Basic Operation
8.1 Login
You should enter the system backend first before setting the
device parameters.
First Login
If it is the first time to login, follow the descriptions below to
login.
Tap the settings icon at the lower right corner of the initial page
and enter the device activation password on the Input Password
page. Tap OK to enter the home page.
Administrator Login
If you have set the administrator on the User Management page,
follow the steps below to login.
Tap the settings icon at the lower right corner of the initial page.
Select a login type. Follow the instructions and authenticate the
permissions to enter the home page.
Note
• The device will be locked for 30 minutes after 5 failed password
attempts.
• For details about setting the administrator authentication
mode, see Adding User.
8.2 Communication Settings
You can set the network parameters, the Wi-Fi parameter, the
RS-485 parameters, and the Wiegand parameters on the
communication settings page.
8.2.1 Set Network Parameters
You can set the device network parameters, including the IP
address, the subnet mask, and the gateway.
Steps
1. Tap Comm. (Communication Settings) on the Home page to
enter the Communication Settings page.
2. On the Communication Settings page, tap Network to enter the
Network tab.
Figure 8-1 Network Settings
14