HIKVISION DS-K1T605 Series, User Manual

Page: 36 / 107

Parameter Description
Auto Enable
Supplement
Light
If enabling the function, when it is too dark, the
supplement light will be turned on automatically.
If disabling the function, the supplement light will be
on all the time.
Brightness
You can set the supplement light’s brightness.
The brightness ranges from 0 to 100. 0 refers to
turning off the light. 1 refers to the darkest light, and
100 refers to the brightest light.
Language
Change the system language. English, Thai, Spanish,
and Arabic are available.
Note
The system will auto reboot after you change the
language.
Threshold for
Auto Enabling
Supplement
Light
When the auto enable supplement light function is
enabled, you can set the illumination threshold. When
the illumination is lower than the configured
threshold, the supplement light will turned on
automatically.
8.7.2 Set Face Picture Parameters
You can set the face picture 1:N security level, 1:1 security level,
liveness security level, face recognition interval, duplicated
person, live face detection.
On the Home page, tap System (System Settings) to enter the
System Settings page.
Figure 8-10 Face Picture Parameters
Table 8-1 Face Picture Parameters
Parameter Description
1:N Security
Level
Set the matching security level when
authenticating via 1:N matching mode.
1:1 Security
Level
Set the matching security level when
authenticating via 1:1 matching mode.
Liveness
Security
Level
After enabling Live Face Detection
function, you can set the matching
security level when performing live face
authentication.
27