3. In the Credential Fingerprint panel, click +.
4. In the pop-up window, select the collection mode as Remote.
5. Select an access control device which supports fingerprint
recognition function from the drop-down list.
6. Collect the fingerprint.
1) Click Start.
2) Place and lift your fingerprint on the fingerprint scanner of
the selected access control device to collect the fingerprint.
3) Click Add to save the recorded fingerprint.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons .
9.1.9 Configure Access Control Information
When adding a person, you can set her/his access control
properties, such as setting the person as visitor or as blacklist
person, or as super user who has super authorization.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. In the Access Control panel, set the person's access control
properties.
PIN Code
The PIN code must be used after card or fingerprint when
accessing. It cannot be used independently. It should contain
4 to 8 digits.
Super User
If the person is set as a super user, he/she will have
authorization to access all the doors/floors and will be
exempted from remaining closed restrictions, all anti-
passback rules, and first person authorization.
Extended Door Open Time
When the person accessing door, grant this person more
time to pass through doors which have been configured with
extended open duration. Use this function for the persons
with reduced mobility.
For details about setting the door's open duration, refer to
Configure Parameters for Door/Elevator.
Add to Blacklist
Add the person to the blacklist and when the person tries to
access doors/floors, an event will be triggered and send to
the client to notify the security personnel.
Mark as Visitor
39
Summary of Contents for DS-K1T605 Series
Page 1: ...Face Recognition Terminal UD07930B E...
Page 104: ...95...
Page 105: ...C Relationship between Device Height Person Height and Standing Distance 96...
Page 107: ...E Dimension 98...
