Section 4
♦
Operating the CMN-41
48
CMN-41 Series Installation and Operation Handbook
Copyright © 2009, Harris Corporation
Configure the audio display type and parameters using the Audio
→
Channel selection
options. Audio can be displayed as one of the following:
•
One two-channel bar graph with one Lissajous and one Phase bar
•
Two two-channel bar graphs (for a total of four channels) with two Lissajous and
two Phase bars
•
Three two-channel bar graphs (for a total of six channels) with three Phase bars or
CineSound 5.1 with two Phase bars
•
Four two-channel bar graphs (for a total of eight channels) with four Phase bars or
CineSound 5.1+AUX, 6.1, or 7.1 with up to three phase bars
•
Eight two-channel bar graphs (for a total of sixteen channels) with eight Phase bars
Lissajous can be selected as Soundstage or X-Y displays.
Input assignments, scaling, input levels, and response can also be modified using the
Audio Setup menu.
Audio Scales
The Vertical audio graticule scales change according to the selections made in the
Audio
→
Meter Setup
→
Scale selection options. The Scale selection options are as
follows:
•
Type I
•
DIN 45406
•
Type IIA
•
dBFS
•
Type IIB
•
Zero Ref dBFS
•
Type I + 8
•
Custom dBFS
•
Nordic
•
Custom dB
Vertical Audio Displays
Vertical Audio display diagrams are shown in
Figure 4-29
to
Figure 4-32,
and
described in
Table 4-9
to
Table 4-12
. The Vertical audio graticule scales change
according to the scale selections made in the Setup menu.
