Section 3
♦
General Information
22
CMN-41 Series Installation and Operation Handbook
Copyright © 2009, Harris Corporation
Accessing and Navigating the Setup Menu
Press the SETUP button to access the global Setup menu. Specific
function setup menus can be accessed directly by pressing and holding
the corresponding function button.
For more information on the global Setup menu, see page 64.
Use the navigation buttons or the setup position knobs to navigate the Setup menu. The
setup position knobs and navigation buttons are described in
Table 3-5
.
Table 3-5. Setup Position Knobs and Navigation Button Functions
Button/Knob Function
Press to exit the Setup menu.
Press to enter or exit the Setup menu.
Press to select a menu item, or open a menu or submenu.
Press to move up in a menu or submenu tree.
Press to move right to the next submenu.
Press to move out of a submenu.
Press to move down in a menu or submenu.
Rotate to set numeric values for certain parameters.
Press to set parameter to default value.
Press to use the numeric keypad for direct parameter entry. The Shift button will be
high tally to indicate that the numeric keypad is available for direct parameter entry.
Capturing a Display
The CMN-41 is capable of holding frame-captured displays in internal
memory. The DISP button is high tally when a capture is performed or
recalled. If no frame had been captured, press the DISP button to
capture the screen.
Only one captured frame can be cached in the unit at a time. The frame will remain
cached until the frame is cleared. Once the frame is frozen and the DISP button is high
tally, press the DISP button to toggle between the captured frame and the live frame.
