Section 4
♦
Operating the CMN-41
32
CMN-41 Series Installation and Operation Handbook
Copyright © 2009, Harris Corporation
To exit the cursor function while leaving the cursors active, press the WFM button or
select another mode in the display (that is, LINE, GAIN, or POS).
Waveform Setup Menu
Press and hold the WFM function button to access the Waveform Setup menu. For
more information on the Waveform Setup menu, see page 66. For descriptions of
Waveform Setup menu selection options, see page 75.
Vector Display
Press and release the VEC function button to access the vector display.
A vector display is shown in
Figure 4-9
and described in
Table 4-4
.
This illustrates the general location for the various vector fields.
Press and hold the VEC function button to access the Vector Setup menu selection
options. (Press the SETUP or the EXIT button to clear the Vector Setup menu.)
Figure 4-9. Vector Display Diagram
