CMN-41 Series Installation and Operation Handbook
15
Copyright © 2009, Harris Corporation
Section 3
♦
General Information
Terms
The following terms are used in this section:
•
Display
: The output at the DVI connector
•
Full
: Full-screen display of the selected input
•
MLT
: Overlay multi-mode operational state
Overview
The CMN-41, shown in
Figure 3-1
and described in
Table 3-1
, can display one input
at a time, in full-screen mode. Each screen provides a user-selectable customized
display of waveform, vector, gamut, audio, picture, relative timing, or alarm functions.
NOTE
: Pressing and holding certain buttons will activate menus for additional functionality. See
Table 3-1
for more information.
Types of Controls
The CMN-41 is controlled in three ways:
•
Quick Controls
: Controls on the front panel that adjust parameters that are
frequently used.
•
Menu Settings
: Shortcut menus within a function that are used to control the
parameters for the individual function.
•
Global Setup Menu Settings
: Setup menu parameters that affect the entire unit
(not function-specific). The Setup menu is accessed by pressing the SETUP button.
