Section 4
♦
Operating the CMN-41
CMN-41 Series Installation and Operation Handbook
37
Copyright © 2009, Harris Corporation
Figure 4-17. Vector HD 75% + 100% Graticule
Vector Front Panel Selections
The following buttons directly affect the vector display.
Setting the Vector Gain
Gain is used to set the range of the amplification in the video signal. The standard gain
in the vector is x1.0. The CMN-41 can be used to set the gain amplification in the
video signal using the Gain button. The gain setting appears in the upper-left portion of
the vector display, as shown in
Figure 4-18
.
Press and release the Gain button, and then use the Up/Down arrow
knob to scroll through the gain selection range, or press the Up/Down
arrow knob to select one of the preset gain selections (x0.5, x1.0, x2.5,
x5.0).
Figure 4-18. Establishing the Vector Gain
