Section 5
♦
Global Setup Menu Functions
CMN-41 Series Installation and Operation Handbook
79
Copyright © 2009, Harris Corporation
ratio that fills the screen (for example, SD squeezed horizontally 16×9 to 4×3 DVD
source). The anamorphic selection is not available in 16×9 source aspect ratio.
•
Time Code
: This selection option is used to display the time code; that is, the time
that is associated with each video frame. Time Code is keyed over the picture on
the right side. Adjacent to the Time Code, the LTC/DVITC is keyed over the
picture on the right side when Show LTC is selected. (Show LTC cannot be
activated unless ENABLE is selected.) The Position selection option is used for the
vertical placement of the time code at the top, center, and bottom (beyond safe
action areas).
•
Brightness
: This selection option is used to make the picture brightness lighter or
darker. The brightness range is from 0% (for the darkest picture) to 100% (for the
brightest picture). The default picture brightness is 50%.
•
Contrast
: This selection option is used to increase the overall difference between
the lightest and darkest colors. The contrast range is from 0% (for no difference
between the lightest and darkest colors) to 100% (for the most amount of difference
between the lightest and darkest colors). The default picture contrast is 100%.
•
Color
: This selection option is used to change the picture color gun selection.
When all three colors are de-selected the picture display changes to monochrome.
•
Green
:
Green is a setup feature that is used to show the green color component
of the input video. Use the Green feature to set the Saturation and Hue by
matching the intensity of all green bars when a SMPTE split field color bar
signal is applied.
•
Blue
:
Blue is a setup feature that is used to show the blue color component of the
input video. Use the Blue feature to set the Saturation and Hue by matching the
intensity of all blue bars when a SMPTE split field color bar signal is applied.
•
Red
:
Red is a setup feature that is used to show the red color component of the
input video. Use the Red feature to set the Saturation and Hue by matching the
intensity of all red bars when a SMPTE split field color bar signal is applied.
•
VBI Mask
: The VBI (Vertical Blanking Interval) Mask selection option is used to
mask non-active lines. With VBI Mask set to ON, only active lines will be shown
on the picture portion of the display.
•
Native
: When this selection option is enabled, it displays the SD picture as a one-
for-one pixel mapping. When Native mode is not checked, the SD picture fills the
screen.
NOTE
: The Native mode menu item only appears when an SD format is detected or selected.
•
Delay
: This selection option is used to view the horizontal and vertical blanking
areas of the video signal. Delay enables and disables the delay mode. Delay
Position displays the amount of vertical and horizontal delay. Using the Delay
position, turn the Up/Down and Right/Left knobs to position the picture. The Delay
feature is not affected by the Native mode selection.
•
Gamut Error Highlighting
: When Gamut Error
Highlighting is selected in the
Picture setup menu, a grid pattern appears over the picture display highlighting
gamut errors. Gamut highlighting is determined by the gamut threshold settings in
the ALARMS
→
VIDEO ALARMS
→
GAMUT selection option.
