Section 3
♦
General Information
18
CMN-41 Series Installation and Operation Handbook
Copyright © 2009, Harris Corporation
Table 3-1. CMN-41 Front Panel Controls
Key Label
Description
37 VOL
•
Volume selection button; press and release to activate the curved knob
to adjust headphone audio volume
•
Press and hold to access the audio channel selection matrix
Sleep Mode
To setup up Sleep mode, choose the UNIT CONFIGURATION
→
DISPLAY SETUP
→
SLEEP MODE selection option. This menu allows the selection of how much time
has to pass without any button presses in order for the unit to enter Sleep mode.
When entering Sleep mode, the instrument will turn off all LEDs and the display. The
instrument is still active (that is, alarms still triggered, and so forth). When exiting
Sleep mode, the instrument returns to an illuminated state.
Selecting an Input
Press the A/B Input button to select input A or B. (Input A is the default selection.)
When an input is selected, pressing the input button again will change to the new input
from the previous input. High tally indicates input A is selected.
Display Selections
The CMN-41 unit screen display shows data in either a full-screen or an overlay
display. The screen display also contains the Main Title Bar, the display, and the status
bar.
Press the MLT button to toggle between full screen or overlay display.
MLT is high tally when selected.
Full Screen Display
The Full Screen display mode shows a full-screen representation of a waveform,
picture, alarm, vector, gamut, audio, or timing display for a single input at a time.
A sample Full Screen display is shown in
Figure 3-2
and described in
Table 3-2.