Section 5
♦
Global Setup Menu Functions
CMN-41 Series Installation and Operation Handbook
75
Copyright © 2009, Harris Corporation
through individual cell selections. Press the ENT button to assign an input to a meter.
Different audio types (AES or Embedded) can be assigned to a meter or headphone
output.
Figure 5-1. Audio Mapping Matrix Display
Time Code Source Setup Menu Selection Options
The Time Code Source Menu is used to determine the Time Code Source for each
format. The CMN-41 can read LTC (Longitudinal Time Code) and DVITC (Digital
Vertical Interval Time Code) based on the format selected. The Time Code Source
menu has these selection options:
•
LTC
(default)
•
ANC LTC
•
ANC DVITC 0
•
ANC DVITC 1
•
DVITC
: DVITC is monitored on selected lines. After DVITC is selected, adjust
the line selection in the DVITC LINE 525 or DVITC LINE 625 submenus to the
selected line. The range for DVITC LINE 525 is adjustable from Line 10 to 30, and
DVITC LINE 625 is adjustable from line 6 to 30.
For more information on displaying time code see “Time Code” on page 79.
Waveform Setup Menu Selection Options
The Waveform Setup items are described below.
•
Display Format
: This selection option allows a choice of display formats: YC
B
C
R
(default), RGB, Composite, YC
B
C
R
+ Alpha, and RGB + Alpha.
Table 5-17
lists
the relationships between the input and display formats.
