Section 4
♦
Operating the CMN-41
46
CMN-41 Series Installation and Operation Handbook
Copyright © 2009, Harris Corporation
Figure 4-26. Aspect Ratio Source Diagram
Placing the Picture in Line Select Mode
To enable Line Select mode:
1.
Press the LINE button to place the selected Picture display in Line Select mode. A
cursor appears on the selected line, as shown in
Figure 4-24
.
Figure 4-27. Establishing Line Select
NOTE
: In a Progressive (p) format, Odd and Even selections are not available.
2.
Press the Up/Down arrow knob to alternate between the Odd and Even fields for
interlaced formats.
3.
Rotate the Up/Down arrow knob to select the line to be displayed.
Picture Setup Menu
Press and hold the PICT function button to access the Picture Setup menu. For more
information on the global Picture Setup menu, see page 67. For descriptions of Picture
Setup menu selection options, see page 77.
PIP Display
The Picture-In-Picture (PIP) function shows a “thumbnail” of the selected input’s
picture display, with the selected function display information appearing in the
background. The PIP function is available with the waveform, vector, gamut, audio,
alarm, time, and options functions.
While in the active display, press and release the PIP function button to
enable the picture-in-picture display.
