Harris Atlas DVL400, Technical Manual

Page: 95 / 180

2/25/03 888-2473-001 3-35
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Series™
STEP 2
Once you see the screen in Figure 3-40, simply touch the X in the
first 2 screens. This will get you to the first screen in Figure 3-41.
STEP 3
To test the calibration simply touch the screen in several places to
make sure an X shows up where you touched.
STEP 4
If the calibration is good, then press ACCEPT. If not, press
CANCEL and the cal procedure will be started over.
NOTE:
The procedure can be aborted by pressing any of the 5 hardware Quick keys
on the control panel.
Figure 3-40 Touchscreen Calibration Screens
Figure 3-41 Touchscreen Calibration Test Screen
(b) (a)
(b)
(a)