Harris Atlas DVL400, Technical Manual

Page: 68 / 180

3-8 888-2473-001 2/25/03
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation ATLAS Series™
3.5.2 Drive Meters
When the "Drive Meters" button in Figure 3-4 is pressed, it will bring up the screen
shown in Figure 3-6. This screen monitors the exciter power as reported by the
exciter and via a directional coupler in the Drive Control Unit or DCU.
Figure 3-6 Drive Chain Meters Screen
3.5.3 Drive Service
When the "Drive Service" button in Figure 3-4 is pressed, it will bring up the screen
shown in Figure 3-7. Press the Exciter Setup button to access the Exciter Setup
screen shown in Figure 3-8 or the DCU Setup button to access the DCU Setup
screen in Figure 3-11.
Figure 3-7 Drive Service Screen
Exciter power as
reported to controller
by V-XCAST exciter
Power reading
from DCU
directional
coupler (before switch)
To Figure 3-8
To Figure 3-11