Harris Atlas DVL400, Technical Manual

Page: 32 / 180

2-2 888-2473-001 2/25/03
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On ATLAS Series™
2.2.1 Installation Drawings
It is recommended that you look through the drawing package to familiarize
yourself with the information available. Although drawings are provided for all
assemblies in the transmitter, most of the installation and planning information is
given in the following drawings (in the supplied drawing package):
a. Transmitter Outline Drawing - 843-5550-136 (843-5550-173 for DVL 4300
and 5700) Shows connections points for AC, control, coolant lines and rf out-
put. Also gives cabinet dimensions, required cabinet clearances and a table of
basic requirements for all models.
b. AC Power Flow Diagram - Shows overall ac wiring and has information on
proper wire, fuse and breaker sizes as well as location of disconnects.
1.
843-5550-188 (sht 1) - DVL400 - DVL1100, 220/240Vac single phase
2.
843-5550-188 (sht 2) - DVL1500 - DVL3000, 380 - 415Vac 3 phase.
3.
843-5550-217 for DVL 4300 and 5700
c. RF Equipment Layout - Shows one possible placement of the transmitter RF
components based on minimum required clearances.
1.
843-5550-169, DVL400 - DVL2200 - Sheet 1 gives dimensions using
the Teracom filter while sheet 2 shows the Spinner filter.
2.
843-5550-171, DVL3000 - Sheet 1 gives dimensions using the
Teracom filter while sheet 2 shows the Spinner filter.
3. 843-5550-172 for DVL 4300 and 5700
d. Cooling System Layout - 843-5550-170 (843-5550-217 for DVL 4300 and
5700) Shows basic plumbing component locations and connections, flow rate
and pressure information as well as simplified cooling diagrams.
e.
Electrical Installation Diagram - 843-5550-189 (843-5550-218 for DVL 4300
and 5700) Shows interconnect wiring between transmitter and all external
systems, including AC connections.
f.
Cooling System Electrical Diagram - 843-5396-865 (3phase) and 843-5396-
880 (single phase) - Shows the internal workings of the Cooling Control
Panel and all interconnects with transmitter, pump module and heat
exchanger, including AC connections.
g.
Transmitter Wiring Diagram - Interconnection wiring diagram for all
assemblies inside the transmitter cabinet. The wiring diagrams are model
dependent:
•
843-5550-102, DVL 400 up to DVL 1100 - Single Cabinet with 1 to 3 PA
Modules.
•
843-5550-154, DVL 1500, single cabinet with 4 PA modules
•
843-5550-004, DVL 2200 and DVL 3000 - Single Cabinet with 6 or 8 PA
Modules.