Harris Atlas DVL400, Technical Manual

Page: 160 / 180

6-2 888-2473-001 2/25/03
WARNING: Disconnect primary power prior to servicing.
Section 6 Diagnostics ATLAS Series™
6.2 GUI System Log
The GUI contains a System Log which
is a listing of all faults which have
occurred. To see the System Log press
SYSTEM then SYSTEM LOG. This
will bring up the screen in Figure 6-1.
The System Log gives the following information:
a. # - This gives the number of the fault. There can be up to 99 faults in the log,
then it is FIFO (First IN, First Out)
b. Fault Type - This is simply the name of the fault.
c.
Time and Date - This gives the exact time and date that the fault occurred.
d.
Active or Inactive - If the fault is highlighted in red, it is still active and can-
not be cleared. If the fault is not highlighted, then the fault is gone and can be
cleared if so desired.
Function Buttons:
a. RESET - Will erase all inactive faults in the log.
b. NEXT and PREV - These buttons allow you to scroll through the entire fault
list if necessary.
c. BACK - Will take you back to the System main menu.
NOTE:
Tables 6-1 and 6-2 give a complete listing of all possible faults in the Atlas
transmitter. They also give a brief description of each fault, the trip point and
the transmitter action taken in response to the fault.
Figure 6-1 Fault Log Screen