Harris Atlas DVL400, Technical Manual

Page: 31 / 180

2/25/03 888-2473-001 2-1
WARNING: Disconnect primary power prior to servicing.
ATLAS Series™
Section 2
Installation /
Initial Turn-On
2
2.1 Introduction
This section includes the information necessary for installation and initial turn on of
an Atlas Series DVB-T, solid state, UHF transmitter. Information is included for
single and multiple cabinet configurations. Due to the modular nature of the Atlas,
all models have the same basic cabinet level installation and testing procedures,
with additional information given for multiple cabinet connections and testing.
2.2 Documentation
The following is a list of documentation that ships with the transmitter (in addition
to this manual):
a.
Drawing Package with a complete set of prints for the transmitter. This
should have your transmitter model number printed on the front.
b.
CD-ROM - There should be a CD-ROM accompanying this manual. It
contains:
1.
An Acrobat (pdf) version of this manual. This is convenient as it allows
full search capability, color pictures and allows extra copies to be made
at any time.
2.
An Acrobat (pdf) version of the Drawing Package with a linked index
for quick access. This also allows printing of extra copies or
replacements.
3. A copy of the transmitter control software of the same revision as
loaded into the transmitter at the factory.
4.
Harris ISP (In-System Programming) software which is used to install
software upgrades into the transmitter controllers.