Harris Atlas DVL400, Technical Manual

Page: 62 / 180

3-2 888-2473-001 2/25/03
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation ATLAS Series™
NOTE:
A similar set of GUI screens is available via web browser with an ethernet
network connection and the optional network interface box.
3.2.1 Main Menu "Quick" Buttons
Just to the right of the touchscreen, there are 5
hardware buttons which are part of the front panel
overlay. Located next to each button is a Status
LED which illuminates green under normal, no
fault conditions. These buttons provide quick
access to each of the 5 main transmitter groups,
namely:
a. Drive Chain
b. Power Amp
c.
Output
d.
Power Supply
e. System
The Status LED next to the button will turn red if
there is a warning or fault condition in that section
of the transmitter. It will be green if the sub-system
is normal. This provides quick access to the
required and relevant diagnostics information,
without having to be familiar with a menu structure.
NOTE:
To differentiate these buttons from the ones which show up on the LCD dis-
play, these will be referred to as "Quick" buttons in the manual text.
3.3 Graphical User Interface (GUI)
The GUI ("Gooey") was designed to provide an intuitive interface into the
transmitter control system. Once you know what information is available, finding
the information you want is simply a matter of following the screens to the desired
section of the transmitter. Menu Trees of all available screens is given at the end of
this section, see "3.10 GUI Menu Structures" on page 3-37.
For the most part, all navigation through the GUI screens is done via the
touchscreen and softkeys (software buttons). The exceptions are the 5 hardware
buttons mentioned above. The touchscreen display is also divided into an active
display area, which will change with each screen, and the global areas which are
present on all screens.
SYSTEM